Assessing peri-implant bone microarchitecture: conventional vs. osseodensification drilling - ex vivo analysis

Abstract: The aim was to evaluate primary implant stability and bone microarchitecture in two drilling situations, by comparing the conventional technique (CT) and osseodensification (OD) (Versah Burs - Jackson - Mississippi - USA). The implant insertion torque (IT), implant stability quotient (ISQ), and the peri-implant trabecular microstructure were assessed on bone fragments obtained from pig's tibia (n=12), divided between CT (n=6) and OD (n=6). After the drilling procedure, the implants were installed (3.5x8.5 mm, Epikut - SIN - São Paulo - Brazil). The IT and ISQ were measured using a digital torque wrench and resonance frequency analysis. Then, the bone fragments containing the implants were removed with a trephine and analyzed by Microtomography (µCT, 8.0 µm). The comparison between groups was performed using the unpaired t-test (α=0.05). The results revealed that OD promotes a higher insertion torque (CT: 7.67±2.44 Ncm; OD: 19.78±5.26 Ncm) (p=0.0005), although ISQ was not different (CT: 61.33±4.66; OD: 63.25±4.58) (p=0.48). There was a significant increase in peri-implant bone volume (CT: 23.17±3.39 mm3; OD: 32.01±5.75 mm3) (p=0.008), and trabecular parameters: separation (CT: 0.4357±0.03 mm; OD: 0.3865±0.04 mm) (p=0.0449), number (CT: 1.626±0.18 1/mm; OD: 1.946±0.13 1/mm) (p=0.007), and thickness (CT: 0.1130±0.009 mm; OD: 0.1328±0.015 mm) (p=0.02). Structure model index (SMI) data demonstrate no significant differences between groups (CT: 1.7±0.2; OD: 1.4±0.4) (p=0.12). In conclusion, OD increases the insertion torque values and promotes beneficial changes regarding bone microarchitecture compared with CT, revealing more peri-implant bone volume with consequent higher primary stability.

Resumo O objetivo deste estudo foi avaliar a estabilidade de implante e a microarquitetura óssea em duas técnicas de fresagem, comparando a técnica convencional (CT) e a osseodensificação (OD) (Versah Burs - Jackson - Mississippi - EUA). O torque de inserção do implante (IT), quociente de estabilidade primária (ISQ) e a estrutura trabecular peri-implantar foram avaliados em fragmentos ósseos obtidos de tíbia de porco (n=12), divididos entre CT (n=6) e OD (n=6). Após o procedimento de fresagem, foram instalados implantes (3,5x8,5 mm, Epikut - SIN - São Paulo - Brasil). O IT e o ISQ foram aferidos por meio de um torquimetro digital e análise de frequência de ressonância. Em seguida, os fragmentos ósseos contendo os implantes foram removidos com trefina e analisados ​​por microtomografia computadorizada (µCT, 8,0 µm). A comparação entre os grupos foi realizada por meio do teste-t não-pareado (α=0.05). Os resultados revelaram que a OD promove maior torque de inserção (CT: 7,67 ± 2,44º Ncm; OD: 19,78 ± 5,26 Ncm) (p=0,0005), embora a estabilidade primária não tenha sido diferente (CT: 61.33 ± 4.66; OD:63.25 ± 4.58) (p=0,48). Houve um aumento significativo no volume ósseo peri-implantar (CT: 23,17±3,39 mm3; OD: 32,01±5,75 mm3) (p=0,0089) e parâmetros trabeculares: separação (CT: 0,4357 ± 0,03 mm; OD: 0,3865 ± 0,04 mm) (p=0,0449), número (CT: 1,626 ± 0,18 1/mm; OD: 1,946 ± 0,13 1/mm) (p=0,007) e espessura (CT: 0,1130 ± 0,009 mm; OD: 0,1328 ± 0,015 mm) (p=0,02) O índice de modelo estrutural (SMI) não demostrou diferença estatisticamente significativa (p=0.1228). Concluindo, OD apresenta maiores valores de torque de inserção e promove mudanças benéficas na microarquitetura óssea em comparação com a TC, revelando maior volume ósseo peri-implantar.

Dogs naturally infected by Rangelia vitalii, Babesia canis vogeli, and Ehrlichia canis in São Paulo, Brazil / Cães naturalmente infectados por Rangelia vitalii, Babesia canis vogeli, e Ehrlichia canis em São Paulo, Brasil

Several agents can cause hemoparasitic diseases in dogs, and blood-sucking arthropods transmit these diseases. These agents can cause several clinical manifestations and, in some cases, can kill the host. Because these agents are essential in animal health, this study aims to detect the frequency of Ehrlichia canis, Rickettsia rickettsii, Anaplasma platys, and Rangelia vitalii by real-time PCR and Babesia vogeli in dogs in the southern region of the city of São Paulo, São Paulo. Of the 98 dog samples, 18 (18.4%) tested positive with real-time polymerase chain reaction for at least one studied agent. Of these 18 samples, 17 tested positive for a single agent (11.2% for B. canis vogeli, 1.02% for R. vitalii, and 5.1% for E. canis), and one showed co-infection with B. canis vogeli and R. vitalii. The results demonstrate the presence of hemoparasites in the studied animals, which can influence the quality and life expectancy of these animals. The Rangeliadetection warns small animal clinicians to include it as a differential diagnosis for hemoparasitosis.(AU)

As hemoparasitoses em cães podem ser causadas por diversos agentes, sendo essas doenças transmitidas por artrópodes hematófagos. Esses agentes podem causar diversas manifestações clínicas e, em alguns casos, podem matar o hospedeiro. Este estudo teve como objetivo detectar por PCR em tempo real a frequência de Ehrlichia canis, Rickettsia rickettsii, Anaplasma platys, Rangelia vitalii e Babesia canis vogeli em amostras de cães da zona sul da cidade de São Paulo, Brasil. Das 98 amostras de cães, 18 (18,4%) testaram positivo com reação em cadeia da polimerase em tempo real para pelo menos um agente estudado. Destas 18 amostras, 17 testaram positivo para um único agente (11,2% para B. canis vogeli, 1,02% para R. vitalii e 5,1% para E. canis), e uma apresentou coinfecção com B. canis vogeli e R. vitalii. Os resultados demonstram a presença de hemoparasitas nos animais estudados, o que pode influenciar a qualidade e a expectativa de vida desses animais. Além disso, é o primeiro relato da detecção de R. vitalli na zona sul de São Paulo e serve de alerta para os clínicos de pequenos animais incluírem esse agente como diagnóstico diferencial para as hemoparasitoses.(AU)

Comparison Between Radiographs, White and Fluorescent Images in the Diagnosis and Treatment Decisions for Occlusal Caries: An Ex Vivo Study

ABSTRACT Objective: To compare the agreement of images in white light (WL), fluorescence (FL), and digital radiographs (DR), on the diagnosis and treatment decisions for occlusal caries lesions against a micro-CT gold standard. Material and Methods: Ten extracted third molars, with enamel and/or dentin caries (ICDAS 2-4), were included. Occlusal surface images were acquired with an intraoral camera (SoproLife®) in WL and FL modes. DR was obtained using an intraoral X-ray and a semi-direct digital system. A total of 780 images were needed, organized in a template, to be later examined by twenty-six dentists invited to compose the study. The Generalized Estimation Equations model was used to compare the proportions of the correct answers between the three methods and the gold standard. When significant, Bonferroni post-hoc test was used to identify differences (α=5%). Results: Most of the examiners were specialists (76.9%) with 14.5 years of experience. All diagnostic methods were similar and showed low agreement (DR 12.7%, WL 16.5%, and FL 16.5%) compared with gold standard caries diagnostic scores. Regarding treatment decisions, mean agreement for all diagnostic methods was higher (43.2%; p<0.001), and among all methods, WL (48.1%) and FL (51.2%) modes performed better than DR (30.4%, p<0.001). Conclusion: SoproLife® images could help clinicians to propose rational, minimally invasive treatments for occlusal caries lesions.

Time of clerkship rotations' interruption during COVID-19 and differences on Progress Test's scores

SUMMARY OBJECTIVES: The transition from face-to-face to remote teaching is yet to be fully understood. In clinical training, traditional teaching must prevail because it is essential for the acquisition of skills and professionalism. However, the responses of each school to the pandemic and the decision on when to resume clerkship rotations were mixed. In this study, we aimed to analyze whether the time to resume clerkship rotations was associated with the performance of the students by using a multi-institutional Progress Test. METHODS: This is a cross-sectional study conducted at nine different Brazilian medical schools that administer the same annual Progress Test for all students. We included information from 1,470 clerkship medical students and analyzed the time of clinical training interruption as the independent variable and the student's scores as the dependent variable. RESULTS: The comparisons of the students' scores between the schools showed that there are differences; however, they cannot be attributed to the time the clerkship rotations were paused. The correlation between the schools' average scores and the time to resume clerkship rotations was not significant for the fifth year (r= -0.298, p=0.436) and for the sixth year (r= -0.440, p=0.240). By using a cubic regression model, the time to resume clerkship rotations could explain 3.4% of the 5-year students' scores (p<0.001) and 0.9% of the 6-year students, without statistical difference (p=0.085). CONCLUSIONS: The differences between the students' scores cannot be attributed to the time when the schools paused the clerkship rotations.

How obesity affects nasal function in obstructive sleep apnea: anatomic and volumetric parameters / Como a obesidade afeta a função nasal na apneia obstrutiva do sono: parâmetros anatômicos e volumétricos,

Abstract Introduction Obstructive sleep apnea is a consequence of upper airway collapse. Any obstructive sector in the upper airway can contribute to pharyngeal collapse. Obesity and obesity-related disorders play an important role in obstructive sleep apnea and its relationship with increased upper airway resistance. Objective This study was designed to evaluate the relationship between obesity and properties of the nasal cavity in patients with obstructive sleep apnea. Methods The study was conducted retrospectively by review of medical records of adult patients. The nasal obstruction symptom evaluation, NOSE instrument, was used to measure nasal obstruction. Sleep breathing disorders were evaluated by polysomnography exams. Nasal volume was obtained by computed tomography scans and volumetric reconstruction of nasal airway. Nasal anatomic alterations were assessed by nasal endoscopy. Results Analysis of 83 patient records, among whom 54 were male and 29 females, found the mean body mass index of 28.69 kg/m2. Obese and non-obese groups were determined by using cut-off 30 kg/m2. In the comparison between groups, the obese group had a positive and significant correlation with apnea/hypopnea index (p= 0.02), NOSE instrument (p= 0.033) and inferior turbinate hypertrophy (p= 0.036), with odds ratio 1.983 (95% IC 1.048 − 3.753). nasal septum deviation (p= 0.126) and nasal airway volume evaluation (p= 0.177) showed no significant results. Conclusion Obesity was significantly correlated with subjective nasal obstruction, NOSE scale, and inferior turbinate hypertrophy in patients with obstructive sleep apnea. There was no correlation with the nasal volume evaluation. Level of Evidence 3b - Individual case-control study.

Resumo Introdução A apneia obstrutiva do sono é consequência do colapso das vias aéreas superiores Qualquer região de obstrução nas vias aéreas superiores pode contribuir para o colapso da faringe. A obesidade e os distúrbios relacionados à obesidade desempenham um papel importante na apneia obstrutiva do sono e sua relação com o aumento da resistência das vias aéreas superiores. Objetivo Avaliar a relação entre a obesidade e as propriedades da cavidade nasal em pacientes com apneia obstrutiva do sono. Método O estudo foi feito retrospectivamente através da revisão de prontuários médicos de pacientes adultos. O instrumento de avaliação NOSE, do inglês nasal obstruction symptom evaluation, foi usado para avaliar a obstrução nasal. Os distúrbios respiratórios do sono foram avaliados através de exames polissonográficos. O volume nasal foi obtido por tomografia computadorizada e a reconstrução volumétrica das vias aéreas nasais. As alterações anatômicas nasais foram avaliadas por endoscopia nasal. Resultados A análise dos prontuários de 83 pacientes, entre os quais 54 eram do sexo masculino e 29 do feminino, encontrou um índice de massa corporal médio de 28,69 kg/m2. Os grupos obeso e não obeso foram determinados com o ponto de corte de 30 kg/m2. Na comparação entre os grupos, o grupo obeso apresentou correlação positiva e significante com o índice de apneia/hipopneia (p = 0,02), instrumento NOSE (p = 0,033) e hipertrofia da concha inferior (p = 0,036), com uma odds ratio de 1,983 (IC95%: 1,048 a 3,753). A avaliação do desvio do septo nasal (p = 0,126) e do volume das vias aéreas nasais (p = 0,177) não mostrou resultados significantes. Conclusão A obesidade correlacionou-se significantemente com a obstrução nasal subjetiva pela escala NOSE e hipertrofia de concha inferior em pacientes com apneia obstrutiva do sono. Não houve correlação com a avaliação do volume nasal. Nível de evidência 3b. Estudo de caso-controle individual.

In vitro establishment and multiplication of Echynochloa polystachya

The objective of this work was to carry out the in vitro establishment of Echynochloa polystachya aiming at obtaining a micropropagation protocol for works involving the selection of superior genotypes and the cultivation of the species. E. polystachya stems were collected in the municipality of Manaus-AM. Explants were inoculated in test tubes containing Murashige and Skoog (MS) medium. Thirty days after in vitro establishment, the rate of sprouting and contamination were evaluated. Experiments were also carried out to assess the effects of sucrose and 6-benzylaminopurine (BAP) concentrations on the tillering rate of explants. It was found that during the successive subcultures there was a decrease in internodes and the consequent loss of vigor. There were responses in the multiplication rate at concentrations starting from 45 g L-1 sucrose. In addition, BAP and sucrose interfered the development and in vitro multiplication. Sucrose in conjunction with BAP was harmful and shortened internodes. The physiological state of the explants for the species under study was intrinsically linked to the concentrations of sucrose used for the culture medium and the concentrations of BAP. However, the sucrose and BAP concentrations suggested for in vitro cultivation of E. Polystachya must be adjusted during successive subcultures. Absence of contamination in the in vitro establishment occurred at concentrations 15, 30 and 60 g L-1 sucrose. The combination of 1.5 mg L-1 BAP and 30 g L-1 sucrose promoted greater induction of sprouts. In addition, the in vitro rooting of E. polystachya was 45%.

Efficacy of 30% and 38% Silver Diamine Fluoride in Arresting Caries Lesions After Different Application Times: An in Vitro Study

Abstract Objective: To evaluate the efficacy of silver diamine fluoride (SDF) in arresting dentin caries lesions when applied under different concentrations and times. Material and Methods: Forty-two bovine blocks were selected and fixed in 24-well plates. Each well received a mixed bacterial inoculum added to the culture medium with 5% sucrose. The plates were incubated in microaerophilia (7 days) for caries formation, confirmed by micro-CT (M1). SDF was applied over the carious lesions for different times and concentrations (n=6): SDF 30% - immediate removal, 1 minute and 3 minutes; SDF 38%, - immediate removal, 1 minute and 3 minutes. The group without treatment was the control. Then, the samples were again scanned by micro-CT (M2) and submitted to a second cariogenic challenge for 21 days. Then, a final scan was performed (M3). Results: Mean pH at the culture medium and lesion depth were compared using Kruskal-Wallis and Wilcoxon tests. 38% SDF showed the lowest metabolic activity of the biofilm. All 38% groups and 30% 1 and 3 minutes did not show an increase in mean lesion depth comparing M3 with M1. However, only 30% 3 minutes and 38% 1 and 3 minutes showed a significant reduction of lesion depth. Conclusion: The minimum application time of 30% SDF to arrest dentin caries lesion was 1 minute, while 38% SDF arrested with application and immediate removal.

Retreatment of mesial roots of mandibular molars filled with resin-based and bioceramic sealers

Aim: The aim of this study was to evaluate, by micro-computed tomography (micro-CT) analysis, the remaining filling material during endodontic retreatment performed with Protaper retreatment without solvent. Methods: Forty mandibular molars were divided into two groups (n = 20) according to the sealer used in the obturation: the bioceramic TotalFill BC (TF) or the resin-based AH Plus (AHP). The specimens were scanned before instrumentation, after obturation and after filling removal. Only the mesial roots were analysed. The filling volumes and the remaining filling material were calculated in the entire root canal and in the cervical, middle and apical thirds. Results: The volume of obturation and the volume of remaining filling material in the entire root canal and in the cervical, middle and apical thirds of the canal between the groups were not statistically different (independent t-test, p > 0.05). In the AHP group, there was a higher percentage of remaining filling material in the middle third than in the cervical third (p < 0.05). Conclusion: The filling material could not be entirely removed from any specimen

In vitro effect of experimental nanocomposites solutions on the prevention of dental caries around orthodontic brackets

Abstract This study aimed to evaluate the in vitro effect of a single application of experimental nanocomposite solutions on the prevention of dental caries around orthodontic brackets. The specimens were exposed to mesoporous silica (MS) nanocomposites containing fluoride by association with titanium tetrafluoride (TiF4) or sodium fluoride (NaF). Nanocomposites also could contain calcium and groups were described as MSCaTiF4, MSTiF4, MSCaNaF, MSNaF, and controls (TiF4, and NaF). Specimens were subjected to the formation of a multispecies biofilm to generate a cariogenic challenge. After 24h, both pH and total soluble fluoride concentration of the culture medium were assessed. Mineral loss was evaluated by percentage of surface mineral loss (%SML), mineral volume variation (ΔZ) of inner enamel and polarized light microscopy (PL). Linear (Ra) and volumetric (Sa) surface roughness and scanning electronic microscopy (SEM) were used to assess enamel topography. Statistical analyses were conducted considering p<0.05. MSNaF had the highest value of culture medium pH after cariogenic challenge, similarly to MSTiF4. All nanocomposite solutions released less fluoride than their controls NaF and TiF4 (p<0.05). All nanocomposite solutions presented lower %SML compared to their respective control groups (p<0.05). Lower Ra, Sa and ΔZ were observed for experimental groups compared to TiF4 (p<0.05). The results were confirmed by PL and SEM analysis. The experimental nanocomposite solutions contributed for lower enamel demineralization around orthodontic brackets.

RESUMO Este estudo teve como objetivo avaliar o efeito in vitro de uma única aplicação de soluções experimentais de nanocompósitos na prevenção de cárie dentária em braquetes ortodônticos. Os espécimes foram expostos a nanocompósitos de sílica mesoporosa (MS) contendo fluoreto por associação com tetrafluoreto de titânio (TiF4) ou fluoreto de sódio (NaF). Os nanocompósitos também podem conter cálcio e os grupos foram descritos como MSCaTiF4, MSTiF4, MSCaNaF, MSNaF e controles (TiF4 e NaF). Os espécimes foram submetidos à formação de um biofilme multiespécie para gerar um desafio cariogênico. Após 24h, o pH e a concentração de flúor solúvel total do meio de cultura foram avaliados. A perda mineral foi avaliada pela porcentagem de perda mineral superficial (% SML), variação do volume mineral (ΔZ) do esmalte interno e microscopia de luz polarizada (PL). A rugosidade superficial linear (Ra) e volumétrica (Sa) e a microscopia eletrônica de varredura (MEV) foram utilizadas para avaliar a topografia do esmalte. As análises estatísticas foram realizadas considerando p <0,05. MSNaF apresentou o maior valor de pH do meio de cultura após o desafio cariogênico, semelhante ao MSTiF4. Todas as soluções de nanocompósitos liberaram menos flúor do que seus controles NaF e TiF4 (p <0,05). Todas as soluções de nanocompósitos apresentaram% SML menor em comparação com seus respectivos grupos de controle (p <0,05). Ra, Sa e ΔZ menores foram observados para os grupos experimentais em comparação ao TiF4 (p <0,05). Os resultados foram confirmados por análises PL e SEM. As soluções experimentais de nanocompósitos contribuíram para a menor desmineralização do esmalte ao redor dos braquetes ortodônticos.

Shaping ability of reciprocating and rotary systems in oval-shaped root canals: a microcomputed tomography study / Capacidade de modelagem dos sistemas reciprocante e rotatório em canais radiculares ovais: um estudo de microtomografia computadorizada

ABSTRACT This study compared the shaping ability of single-file reciprocating (WaveOne Gold) and multifile rotary (Mtwo) systems on mandibular oval-shaped canine root canals, using microcomputed tomography (micro-CT). Thirty mandibular canines were scanned by micro-CT and assigned to one of two groups (n=15) according to the system used for root canal preparation: WaveOne Gold or Mtwo. After preparation, the teeth were rescanned, and the percentage of untouched canal area, apical transportation and centering ability were analyzed. The data was evaluated using Kruskal and Mann- Whitney tests (p<0.05). No difference was found in percentage of unprepared canal area between groups in the entire root canal or the apical third, or in centering ability (p>0.05). WaveOne gold had less canal transportation than MTwo at the 5 mm section (p<0.05). WOG and Mtwo systems presented similar shaping ability and centering ability in oval-shaped canals. However, WOG presented less transportation than Mtwo at 5 mm from the apex.

RESUMO Este estudo comparou a capacidade de modelagem dos sistemas reciprocante de lima única (WaveOne Gold) e rotatórios com múltiplas limas (Mtwo) em caninos ovais inferiores, usando microtomografia computadorizada (micro-CT). Trinta caninos inferiores foram escaneados por micro-CT e divididos em dois grupos (n = 15) de acordo com o sistema usado durante o preparo do canal radicular: WaveOne Gold (WOG) e Mtwo. Os dentes foram reeescaneados e a porcentagem de área do canal não preparada, transporte apical e capacidade de centralização foram analisados. Os dados foram avaliados pelos testes de Kruskal Wallis e Mann-Whitney (p<0,05). Nenhuma diferença foi encontrada na porcentagem de área não preparada entre os grupos em todo o canal radicular e no terço apical e na capacidade de centralização (p>0,05). O sistema WOG promoveu menor transporte do canal do que o sistema Mtwo na região de 5mm aquém do ápice (p<0,05). Os sistemas WOG e Mtwo apresentaram capacidade de modelagem e capacidade de centralização semelhantes em canais ovais. No entanto, WOG promoveu menor transporte do que Mtwo a 5 mm do ápice.

Cyclodextrin and TIF4 nanocomplex on enamel demineralization

Abstract The aim of this study was to assess the effect of a newly developed nanocomplex formed of hydroxypropyl-b-cyclodextrin and 1% titanium tetrafluoride (TiF4) after distinct complexation periods (12/72 h) on demineralization of bovine enamel in vitro. Enamel blocks (n=60) were allocated in different groups: Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4, hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h of complexation and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation. The samples were evaluated by surface microhardness, cross-sectional microhardness and micro-CT. Scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDX) were also obtained. Hydroxypropyl-b-cyclodextrin + 1% TiF4 after 12 h complexation resulted in lower percentage of surface microhardness loss compared to Mili-Q water, hydroxypropyl-b-cyclodextrin, 1% TiF4 and hydroxypropyl-b-cyclodextrin + 1% TiF4 after 72 h of complexation group, with a large effect size (from 1.307 to 2.943) and high power (84.9 to 99%). All groups resulted in similar integrated mineral loss (ΔZ) obtained by both internal microhardness and micro-CT techniques. Enamel treated with TiF4 and TiF4 + hydroxypropyl-b-cyclodextrin groups showed a TiO2 glaze-layer, while EDX evaluation identified Ti. The solution containing the inclusion complex of hydroxypropyl-b-cyclodextrin + TiF4 with 12 h of complexation period demonstrated a significant ability to reduce surface demineralization of sound enamel under an artificial cariogenic challenge.

Resumo O objetivo deste estudo foi avaliar o efeito da 1-etil-3- (3-dimetilaminopropil) carbodiimida (EDC) na resistência de união de pinos de fibra de vidro em canais radiculares obturados com diferentes cimentos endodônticos. Setenta e oito pré-molares inferiores foram obturados com três cimentos endodônticos (n=26): Endofill (END), AH Plus (AHP) e Endosequence BC Sealer (EBS). Após o preparo do espaço para pino, dois subgrupos formaram-se conforme a cimentação dos pinos (n=13): com EDC e sem EDC (controle - CON). Os espécimes foram submetidos ao teste pull-out, classificação do modo de falha e avaliação da superfície do canal radicular por microscopia eletrônica de varredura após o deslocamento. Quanto à força de resistência de união, uma diferença estatisticamente significativa ocorreu entre os subgrupos EDC e CON apenas no END (p=0,001). Não foi detectada diferença entre os subgrupos CON (p=0,339). Contudo, no subgrupo EDC, o AHP apresentou maiores valores (END versus AHP: p=0,001; AHP versus EBS: p=0,016). Acerca da classificação dos modos de falha, o escore 1 (≥50% de cimento) foi o mais comumente observado, exceto para END + EDC. Restos de cimentos endodônticos e cimentos resinosos foram encontrados no terço cervical, mas sem diferença estatística (p=0,269), enquanto no terço médio, houve diferença (p=0,004). Em conclusão, o EDC diminui a resistência de união quando associado ao cimento END, sem alterar o modo de falha entre o cimento resinoso e o pino de fibra de vidro. O melhor desempenho foi observado quanto o EDC foi usado com o cimento AHP.

Proportional vascularization along the fallopian tubes and ovarian fimbria: assessment by confocal microtomography / Proporção vascular ao longo das tubas uterinas e fímbria ovariana: avaliação pela microtomografia confocal

Abstract Objective: To evaluate and reconstruct three-dimensional images of vascularization along the fallopian tube (FT), as well as to determine its relationship with the ovary and ovarian fimbria, and to quantify the blood vessels along the FT according to its anatomical segments, using confocal microtomography (micro-CT). Materials and Methods: Nine specimens (six FTs and three FTs with ovaries) were fixed in a solution of 10% formalin for > 24 h at room temperature. Iodine staining was performed by soaking the specimens in 10% Lugol's solution for 24 h. All specimens were evaluated using micro-CT. A morphometric analysis was performed on the reconstructed images to quantify the vascular distribution along the FT. Results: In the FTs evaluated, the density of blood vessels was significantly greater in the fimbrial segments than in the isthmic segments (p < 0.05). The ovarian fimbria was clearly identified, demonstrating the important relationship between these vessels and the FT fimbriae. Conclusion: We believe that the vascularization in the fimbriae is greater than and disproportional that in the other segments of FT, and that the ovarian fimbria plays an important role in the development of that difference.

Resumo Objetivo: Avaliar e reconstruir imagens tridimensionais da vascularização ao longo da trompa de Falópio (TF) e sua relação com o ovário e fímbria do ovário, além de quantificar os vasos sanguíneos ao longo da TF de acordo com seus segmentos anatômicos usando microtomografia confocal (micro-TC). Materiais e Métodos: Nove espécimes (seis com TFs e três com TFs e ovários) foram fixados em solução de formol a 10% por mais de 24 h à temperatura ambiente. A coloração com iodo foi realizada usando solução de Lugol a 10% durante 24 h. Todos os espécimes foram avaliados usando micro-TC. Uma análise morfométrica foi realizada nas imagens reconstruídas para quantificar a distribuição vascular ao longo da TF. Resultados: A densidade dos vasos sanguíneos nas fímbrias foi significativamente aumentada em comparação ao segmento ístmico da TF (p < 0,05). A fímbria ovariana foi claramente identificada, demonstrando importante relação entre esses vasos e as fímbrias da TF. Conclusão: Acreditamos que as fímbrias apresentam vascularização aumentada e desproporcional em comparação com os demais segmentos da TF e que a fímbria ovariana desempenha importante papel nessa diferença.

Sealing Carious Fissures with Resin Infiltrant in Association with a Flowable Composite Reduces Immediate Microleakage?

Abstract Objective: To compare the immediate microleakage of carious fissures sealed with a caries infiltrant covered by a flowable composite or solely with a flowable composite. Material and Methods: Extracted carious molars (n=20) were selected and paired among the experimental groups according to caries progression scores. Experimental groups (n=10) were divided according to the following sealing techniques: 1) caries infiltrant (Icon) + flowable composite (Z350 flow); 2) flowable composite (Z350 flow). Specimens were immersed in 3% methylene blue and evaluated in a stereomicroscope. Microleakage scores were attributed independently by two calibrated evaluators and the mode value was considered as the mean for the specimen. Binomial tests were used to test differences between two independent sample proportions at 5% significance level. Results: In the flowable composite group, a higher prevalence of dye penetration along the full depth of the fissure was observed, compared with caries infiltrant + flowable composite (p<0.05). For specimens showing dye penetration up to half of the fissure, in caries infiltrant + flowable composite group, all specimens showed dye penetration into the sealant, but not over the infiltrant. Conclusion: Using caries infiltrant as sealing material under a flowable composite cover is effective to improve the immediate sealing ability in carious fissures compared to sealing with flowable composite.

Morphological and stomatal characterization of Heliconia chartacea Var. sexy pink induced polyploidy / Caracterização morfológica e estomática de heliconia chartacea var. sexy pink induzidas a poliploidia

The growth of the tropical flower market has demanded a consistent search for new varieties, primarily those endowed with an exotic profile, but that are also beautiful and durable. The genusHeliconia, naturally found in the Amazon region, is among the most prominent of tropical flowers. Looking to augment the genetic variability available in Heliconia chartacea var. Sexy Pink, biotechnological research was conducted with the application of colchicine to induce polyploidy in plants from this species. With that in mind, this study was undertaken to evaluate the establishment of plants in the field drawn from in vitro polyploidy induction assay and to determine the morphological and physiological characteristics of 38 H. chartacea var. Sexy Pink clones. The characterization analyzes were performed through 49 morphological descriptors and a stomatal density evaluation using microscopy. The genotype 35 exhibited the greatest morphological variations, with alterations in the position and coloring of the inflorescence, in addition to having the edges of the entire limbus. Genotype 18 featured the lowest amounts for plant height and inflorescence size, showing promise for research geared towards use in reduced environments. Some genotypes did not have any flowering and arerecommended exclusively for landscape composition such as foliage, since their exotic characteristics allow for this. The genotypes that were evaluated displayed stomata with tetracytic morphology and guard cells that had no significant changes. However, genotypes with greater equatorial diameter and stomatal density were obtained in relation to the mother-plant. Overall, the induction of polyploidy allowed for clones to be obtained with a high variability for the characteristics of the leaf, pseudostem and inflorescence, with various attributes that confer a more efficient post-harvest management to some genotypes, in addition to favorable aspects for commercialized purposes as a cut flower.

A expansão do mercado de flores tropicais tem demandado uma constante procura por novas variedades, principalmente aquelas dotadas de perfil exótico, mas ainda apresentando beleza e durabilidade. Dentre as flores tropicais de maior destaque, se encontram as do gênero Helicônia, sendo estas naturalmente encontradas na região Amazônica. Visando aumentar a variabilidade genética disponível em Heliconia chartacea var. Sexy Pink, pesquisas biotecnológicas foram realizadas com a aplicação de colchicina para indução a poliploidia em plantas da espécie. Deste modo, o objetivo do presente trabalho foi avaliar as plantas estabelecidas em campo, provenientes dos ensaios de indução à poliploidia in vitro para determinar as características morfológicas e fisiológicas de 38 clones de H. chartacea var. Sexy Pink. As análises de caracterização foram realizadas por meio de 49 descritores morfológicos e avaliação da densidade estomática por microscopia. O genótipo 35 foi o que apresentou as maiores variações morfológicas, com alterações na posição e coloração da inflorescência, além de possuir as bordas do limbo foliar inteiras. O genótipo 18 apresentou os menores valores para altura da planta e tamanho das inflorescências, mostrando-se promissor para pesquisas voltadas ao uso em ambientes reduzidos. Alguns genótipos não tiveram floração, sendo recomendada a sua utilização exclusivamente para composição paisagística como folhagens, já que sua exoticidade permite esta finalidade. Os genótipos avaliados apresentaram estômatos com morfologia tetracítica e células-guarda sem alterações significativas, porém, foram obtidos genótipos com maior diâmetro equatorial e densidade estomática em relação a planta matriz. De modo geral, a indução a poliploidia permitiu a obtenção de clones com alta variabilidade para características da folha, pseudocaule e inflorescência, sendo vários os atributos que conferiram a alguns genótipos um manejo pós-colheita mais eficiente, além de aspectos favoráveis para comercialização como flor de corte.

Root canal segmentation in cone-beam computed tomography: comparison with a micro-CT gold standard

Aim: The purpose of this study was to compare root canal volumes (RCVs) obtained by means of cone beam computed tomography (CBCT) to those obtained by micro-computed tomography (micro-CT) after applying different segmentation algorithms. Methods: Eighteen extracted human teeth with sound root canals were individually scanned in CBCT and micro-CT using specific acquisition parameters. Two different images segmentation strategies were applied to both acquisition methods (a visual and an automatic threshold). From each segmented tooth, the root canal volume was obtained. A paired t-test was used to identify differences between mean values resulted from the experimental groups and the gold standard. In addition, Pearson correlation coefficients and the agreement among the experimental groups with the gold standard were also calculated. The significance level adopted was 5%. Results: No statistical differences between the segmentation methods (visual and automatic) were observed for micro-CT acquired images. However, significant differences for the two segmentation methods tested were seen when CBCT acquired images were compared with the micro-CT automatic segmentation methods used. In general, an overestimation of the values in the visual method were observed while an underestimation was observed with the automatic segmentation algorithm. Conclusion: Cone beam computed tomography images acquired with parameters used in the present study resulted in low agreement with root canal volumes obtained with a micro-CT tomography gold standard method of RCV calculation

Effect of aging on dentinal crack formation after treatment and retreatment procedures: a micro-ct study

Abstract In order to evaluate the volume of dentinal cracks taking into account the age of the dentin and the type of file system used for endodontic procedures, forty freshly extracted single-rooted lower incisive teeth presenting similar root volume, were divided into two groups according to the age of the patient: Group Young (18 - 30 years old) and Group Old (60 years old or more). Each specimen was scanned by microcomputed tomography (micro-CT) in three stages: (i) before any treatment, (ii) after endodontic treatment with Reciproc files (REC), and (iii) after subsequent endodontic retreatment. Each group was subdivided into two subgroups, according to the retreatment technique used: retreatment with REC or with ProTaper Universal Retreatment (PUR) files. For each subgroup, the images were analyzed for differences in the volume of dentinal cracks in the middle and apical thirds of the teeth , according to the dentin age. In both stages (before and after instrumentation), the micro-CT images of the old root dentin presented with higher volume of cracks than those of the young root dentin, statistical significance notwithstanding (p>0.01). The use of REC files appeared to have no statistically significant differences in the generation of cracks in any type of root dentin when compared with PUR files (p>0.01). When retreated with PUR, the old root dentin presented with a significantly higher volume of cracks (p<0.01) when compared with the old root dentin initially.

Resumo Para avaliar o volume de fissuras dentinárias levando em consideração a idade da dentina e o tipo de sistema de limas utilizadas para procedimentos endodônticos, 40 dentes unirradiculares, incisivos inferiores, apresentando similar volume radicular, recentemente extraídos foram divididos em dois grupos de acordo com a idade do paciente: Grupo Jovem (18 a 30 anos) e Grupo Idoso (60 anos ou mais). Cada espécime foi scaneada por microtomografia computadorizada (micro-CT) em três estágios: (i) antes de qualquer tratamento, (ii) após tratamento endodôntico com limas Reciproc (REC) e (iii) após subsequente retratamento endodôntico. Cada grupo foi subdividido em dois subgrupos, de acordo com a técnica de retratamento utilizada: retratamento com REC ou com lima ProTaper Universal Retreatment (PUR). As imagens foram analisadas quanto às diferenças no volume das fissuras dentinárias nos terços médio e apical dos dentes de acordo com a idade da dentina. Em ambos os estágios (antes e depois da instrumentação), as imagens de micro-CT da dentina radicular idosa apresentaram maior volume de trincas do que as jovens, sem significância estatística (p>0.01). O uso das limas REC mostram não ter diferença estatística significante na geração de fissuras, em qualquer tipo de dentina, quando comparadas às limas PUR (p>0.01). Quando retratada com PUR, a dentina radicular idosa apresentou um volume de trincas significativamente maior (p<0.01) quando comparado com a dentina radicular idosa inicialmente.

Accuracy of visual and image-based ICDAS criteria compared with a micro-CT gold standard for caries detection on occlusal surfaces

Abstract The aim of this study was to check the in vitro accuracy of ICDAS criteria on digital images compared to visual examination for the diagnosis of occlusal caries against a micro-CT gold standard. ICDAS was scored in 40 extracted permanent molars by means of visual inspection and stereomicroscopic images. Visual examinations were performed in duplicate and at a one-week interval by three different calibrated examiners. The analysis of digital images by ICDAS criteria was also performed in duplicate, 1 month after visual examinations. The detection methods were compared by means of sensitivity, specificity, area under the curve, predictive positive and negative values, and accuracy for two different thresholds (1- sound vs. carious teeth; 2- tooth requiring operative vs. non-operative treatment). Sensitivity and accuracy values for threshold 1 in the visual ICDAS and image-based ICDAS methods were high for sensitivity (0.93 and 0.97) and for accuracy (0.83 and 0.85), but low for specificity (0.55 for both methods). Specificity values for threshold 2 were 0.77 and 0.82, while sensitivity was 0.33 and 0.28 for each method. Spearman's rank correlation coefficient was 0.53 and 0.43 (p<0.05) for visual and image-based ICDAS compared to the gold standard scores. Both visual and image-based ICDAS scores were similar to each other in terms of diagnostic accuracy when compared to the micro-CT gold standard. Low specificity for the presence of caries and sensitivity for the detection of caries requiring operative treatment were found.

Development of a real-time PCR assay for the detection of the golden mussel ( Limnoperna fortunei, Mytilidae) in environmental samples

ABSTRACT The golden mussel, Limnoperna fortunei, is among the most devastating invasive species in freshwater habitats worldwide, leading to severe environmental disturbances and economic losses. Therefore, management efforts would be greatly improved by methods that efficiently detect and quantify the abundance of the golden mussel in freshwater habitats, particularly in early stages of colonization. In this study, we describe a highly-sensitive real-time PCR assay targeting a 100-bp region of the COI mitochondrial gene of the golden mussel. The method was able to detect as little as 0.225 pg of target DNA. This assay represents an important contribution to surveillance methods, as well as to optimize field measures to contain and manage populations of the golden mussel in its introduced range.

On the Causality Between Dentinal Defects and Root Canal Preparation: A Micro-CT Assessment

Abstract This study aimed to evaluate the cause-effect relationship between canal preparation with ProTaper Universal (PTU) system and dentinal defects formation using micro-computed tomography (micro-CT) analysis. Forty mesial canals of mandibular molars with a type II Vertucci's canal configuration were scanned at an isotropic resolution of 14.16 µm. The sample was assigned to an experimental (n = 30) and a control (n = 10) groups, and the mesial canals were prepared with PTU system up to F2 instrument. The specimens from the experimental group were scanned and the cross-section images of the mesial roots, before and after preparation, were screened to identify the presence of dentinal defects. In the control group, the specimens were sectioned perpendicularly to the long axis of the root into 1-mm-thick slices (n = 80) and examined under optical microscope. Once a dentinal defect was detected, the slice was scanned through micro-CT. In the experimental group, dentinal micro-cracks were observed in 4,828 slices (24.04%). In all cross-section images, dentinal defects identified in the postoperative images were already present in the corresponding preoperative image. In the control group, 13 out of 80 slices (16.25%) had at least one dentinal defect visualized under stereomicroscopy, which was identified after a further micro-CT scanning. Micro-CT showed reliability as similar as optical microscopy in detecting dentinal defects, adding the possibility of tracking the dentinal tissue, before and after canal preparation, and providing a clear visualization of micro-cracks. Root canal preparation with PTU system did not induce the formation of new dentinal defects.

Resumo O objetivo deste estudo foi avaliar a relação de causa-efeito entre o preparo do canal radicular com o sistema ProTaper Universal (PTU) e a formação de defeitos dentinários usando a análise por micro-tomografia computadorizada (micro-CT). Quarenta raízes mesiais de molares inferiores com a configuração tipo II de Vertucci foram escaneadas com resolução isotrópica de 14.16 μm. A amostra foi distribuída em um grupo experimental (n = 30) e um grupo controle (n = 10), e os canais mesiais foram preparados com o sistema PTU até a lima F2. As amostras do grupo experimental foram escaneadas e as imagens de secção transversal das raízes mesiais, antes e após o preparo, foram analisadas ​​para identificar a presença de defeitos dentinários. No grupo controle, os dentes foram seccionados perpendicularmente em relação ao longo eixo da raiz em fatias de 1 mm de espessura (n = 80) e examinados ao microscópio óptico. Uma vez detectado um defeito dentinário, a fatia foi escaneada através da micro-CT. No grupo experimental, defeitos dentinários foram observados em 4.828 secções transversais (24,04%). Em todas as imagens de secção transversal, os defeitos dentinários após os procedimentos experimentais já estavam presentes na secção pré-operatória correspondente. No grupo controle, 13 das 80 fatias (16,25%) apresentaram pelo menos um defeito dentinário visualizado através do microscópio, o qual foi identificado em um escaneamento posterior. A micro-CT mostrou confiabilidade com a microscopia óptica para detecção e visualização dos defeitos dentinários, permitindo acompanhar o tecido dentinário antes e depois do preparo do canal. O preparo do canal radicular com o sistema PTU não induziu a formação de novos defeitos dentinários.